Marathon

Marathon Series is made of 85% Virgin EPDM rubber and 15% recycled rubber. That combination makes it the perfect choice for any sports environment! So when you’re ready to invest in the best, get Marathon!

Available as:
38" x 38" Square Tiles | 4 mm, 6 mm, 8 mm, 10 mm, 12 mm
37" x 37" Interlocking Tiles | 8 mm, 10 mm, 12 mm

Installation Note: Tiles should be installed in a brick pattern due to the flexible nature of rubber, unlike VCT or other rigid tiles. Rubber 'breathes,' and even with proper acclimation, the size of the tiles may shift slightly—by as little as 1/16 of an inch. While this difference may not be noticeable on individual tiles, it can become apparent over a large area, particularly at the seams. Installing tiles in a brick formation helps minimize these visible variations. Please note, we no longer accept claims for installations where tiles are laid corner-to-corner.

Color Note: The Marathon Series is composed of rubber in solid and near-solid colors. Due to the natural characteristics of the rubber, some tiles may vary in color. This includes but is not limited to shading from tile to tile; shading within individual tiles; a framing effect in which darker pigments will form around the border of the tile. Although these are not considered defects, to combat these natural occurrences, Summit International Flooring recommends dry laying the tiles before installation. If any tiles show more shading or framing than others, it is suggested that these tiles be placed under furniture or against walls where they are likely to be cut. Production runs can have slight dye lot differences and we will match samples as closely as possible.

Caution: Rubber flooring tiles may experience fading when exposed to direct sunlight. Prolonged exposure to UV rays can lead to a loss of color vibrancy and potential changes in texture. Consider implementing appropriate measures, such as using window coverings, to minimize direct sunlight exposure and preserve the tiles' appearance.

Cleaning: Decorative EPDM rubber floors have a slight texture, so the proper way to clean them is with an extraction machine that incorporates rotating brushes. Between extractions, vacuuming will help, and most stains can be spot-cleaned with Soft Scrub and a sponge.

Marathon Features
Marathon 2025 Floor Score Certification
Marathon Technical Specifications
Marathon Material Safety Data Sheet
Marathon Warranty
TWO-STEP Backing
IIC Rating
Marathon Installation Instructions: Glue-Down | Interlocking
Marathon Cleaning & Maintenance: Glue-Down | Interlocking
IMPORTANT STORAGE & PRE-INSTALLATION NOTES